Polymer Glock Compatible Sights

Great sight for a low price.

Junk. The rear sight went on without much trouble but the front sight wouldn't take the screw. Upon further inspection I noticed the front sight wasn't even tapped and I had to force the screw in to tap it. As soon as I started screwing it to the slide it started cracking and splitting before I even had it all the way tight. I would recommend removing these from your kit and save the 5 bucks.

The set of sights came with the kit - they will be being replaced immediately as they are average to below average in quality - Front sight was not ideally made but I was able to make the misalignment work.

Though the sight was able to be forced into the rockey brass slide, I believe there was an alignment issue with the hole and the screw of the front sight itself. I was able to screw the sight but the screw was starting to interfere with the front part of the slide and not allow me to screw it all the way with the Glock tool. It worked a bit but the screw is still able to make some contact with the barrel.

These are a decent sight, but I will be swapping mine out for steel. Even though I lubed the sight and slot, my sight tool left a bit of damage on the polymer sight. These are the first polymer sights I have ever installed, so some of that could be my fault. But these are exactly what they say they are are and they still function just fine. If you are building a custom firearm, may as well upgrade the sights.